STONEX SC400A, User Manual

Page: 28 / 49

October 2021 – Ver. 1 Stonex SC400A CORS Receiver – User Manual 28
RTK (Output): Transmits differential data. Use only if work mode is Base
RAW (Output): Transmits raw data
BINEX (Output): Transmits data in BINEX format
Spectrum Analysis (Output): Function currently under development
NTRIP Client allows you to connect the SC400A to a caster using the NTRIP protocol. Use only if work mode is rover.
NTRIP Caster: if enabled, activates the Caster service. Allows you to set the transmission port and account for the NTRIP
client. The account is unique but allows multiple simultaneous connections.
Warning: to use this function, at least one NTRIP Server must be active on address 127.0.0.1 and the same port set in the
Caster (See NTRIP Server).