STONEX SC400A, User Manual

Page: 26 / 49

October 2021 – Ver. 1 Stonex SC400A CORS Receiver – User Manual 26
Tip: to get file names compliant with RINEX standards use the names: ssssdddf.yyt (version 2) or Rinex302.dat (version 3).
Pool allows you to manage the data memory: if enabled, it is possible to define a quantity of disk space to dedicate to the
recording session. When the sum of the session files reaches the defined limit, if Delete is set, the oldest files are deleted,
if Stop is set, the recording stops.
It is recommended to always enable the Pool if the Auto option is enabled.
Auto: if enabled, it records continuously, otherwise when the first file is finished it stops.
Integral point record: if enabled, it sets the start time of the files as a multiple of the set duration, otherwise the start time
depends on the first start. It is recommended to enable this option.
File push: Enable automatic transfer of raw files via FTP.
Convert: enable the conversion of the raw file to RINEX. For the RINEX 3.x format the Mixed Nav option is available: if
enabled, it creates a single mixed navigation RINEX file.
Phase center antenna: if enabled, the header coordinates are referred to the phase center.
File Push: Enables automatic transfer of RINEX files via FTP. This option is effective only if raw file transfer is enabled. The
FTP server and the access parameters are those indicated in the Push Parameters section.