Stonesonic SCM-1081MR, User Manual, Page: 22 / 23

4.4 Camera Control
4.4.1 PTZ Control
PTZ Parameter setup
Note:
PTZ operations
Enter <Tool Bar>, <System Menu>--<PTZ Setup) to set camera channel,Protocal, Boud rade and ID.
The different PTZ onctrolled by one PCI should have corresponding PTZ ID. There are 16 PTZ
ID supported. Currently:0-15
In preview mode, select a tile first (in 4/9/16 splits view mode, the selected tile is with highlight white
border) using mouse or <Nurbers> buttons, and then enter <Tool Bar>, PTZ control to the PTZ Control
interface that described as the table below:
Picture PTZ Control int 4-4
4. Setup of Time period, Channel no. and Time Scale, then press to move focus to Search
and use to operat. Time scale will show the searched record.
5. or
【 】、【 】
or
or
After searching over, press 【 Fn 】 button to pop-up the timeline for selecting start point.
Press 【 】 , 【 】 buttons to move timeline, press 【 Fn 】 to confirm selection. Press 【 Fn 】
again to pop-up the second timeline for selecting stop point, press 【 】 , 【 】 buttons to
move timeline, press 【 Fn 】 to confirm selection.
After all settings, move highlight icon to 〖 Play 〗 using 【 】 , 【 】 buttons, and press button
to start playing. move highlight icon to 〖 Backup 〗 using 【 】 , 【 】 buttons, and press button
to backup.
Play control
： Fast backward Press to circle between “ 8 times fast backward and 16 times fast backward.
： Pause the current play, or stop the current pause.
： Stop playing.
： Click to control speed of Forward, the availabel forward speed are 1X, 8X , 16X, 1/2X, 1/4X
： Go to next frame
： Press to switch from single split view mode to multi split view.
I nd i ca ti on
16X
16X fas t forward S pe e d
8 X
1
X
N ormal playing
1/2X 1/4X
1/ 2X forwa rd 8X fast backwards
8X 16X
Note: When playback only one channel, the image will displayed in full-screen.
1/4X forward 16X fas t backwa rds 8X fast f orward
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL
-24- -21-
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn