Rack-Mounting
13
Locking Tabs:
As you have seen, both rails have a locking tab, which
serves two functions.
• To lock the appliance into place when installed and pushed fully into
the rack, which is its normal position.
• To lock the appliance in place when fully extended from the rack to
prevent the appliance from coming completely out of the rack when
you pull it out for servicing.
T
To attach the inner rails to the appliance
1. Position the inner rail sections you just removed along the side of
the appliance making sure the screw holes line up. Note that
these two rails are left/right specific.
Illustration 4 Attaching the Inner Rail to the Appliance
2. Screw the rail securely to the side of the appliance with the
supplied screws.
3. Repeat the procedure for the other side of the appliance.
4. When installing to a four-post Telco rack, attach the rail brackets.
If you are installing the appliance into a two-post Telco rack,
proceed to
Installing the Appliance into a Two-Post Telco Rack
, on
page 14.
T
To attach the outer rails to the rack
1. Determine where you want to place the appliance in the rack.
2. Position the fixed rack rail/sliding rail guide assemblies at the
desired location in the rack, keeping the sliding rail guide facing
the inside of the rack.
3. Screw the assembly securely to the rack using the brackets
provided.
