background image

Introduction 3

I n t r o d u c t i o n

Thank you for choosing a Stonesoft™ appliance. This guide provides 

instructions for the initial hardware installation and the maintenance of 

the FW-105 Series appliances. See 

Product Documentation

 (page 5) for 

information on other available documentation.
The use of the appliance is subject to the acceptance of the End User 

License Agreement, which can be found at the Stonesoft website.

C on t ent s

 Installation Procedure .................. 4
 Product Documentation ................ 5
 Safety Precautions ....................... 5
 Unpacking the Appliance .............. 7
 Front Panel .................................. 8
 Back Panel .................................. 10
 Connecting Antennas and Cables .. 11
 Initial Configuration ...................... 13
 Wall-Mounting .............................. 24
 Maintenance Operations............... 25
 Conformity Marks......................... 28
 Compliance Information................ 28
 Disposal Instructions ................... 30

Caution – 

Never open the covers of the appliance! There are no user 

serviceable parts inside. Opening the covers may lead to serious 

injury and will void the warranty. Read the 

Safety Precautions

 (page 5) 

before you conduct any installation or maintenance operations on the 

appliance.

Summary of Contents for FW-105 series
































Reviews: