Stoneridge SE5000, Control Manual

Page: 31 / 34

Display Messages
Display Description Action
perature of the printer is too low. Related to
the printer.
Printer out
of paper
Message
The ongoing printing has been interrupted
because the printer is out of paper. Replace paper.
If fault remains active for no apparent
reason the tachograph must be decom-
missioned and replaced.
Printing
cancelled
Message
The ongoing printing has been cancelled. No further action required.
Quarter
left reminder
Message
The driver has 15 minutes left until the legal
maximum continuous driving time of
4½ hours will be exceeded. Find a suitable place to take a break in
the next 15 minutes.
reminder
daily rest
Pre-warning
A reminder for the daily rest.
reminder
weekly rest
Pre-warning
A reminder for the weekly rest.
secondary
sensor fault
Fault
No or erroneous data from the second
source motion sensor. Related to the motion
sensor. Check second source sensor operation
and wiring.
Sensor
auth. failure
Check motion sensor operation and all
wiring.
Check for evidence of tampering.
Pair the motion sensor and tachograph
again.
Perform a new calibration of the tacho-
graph system.
Replace the sensor if found faulty.
Sensor
cable fault
Warning
Sensor data error. Related to the motion sen-
sor. Check the motion sensor operation and
wiring.
Replace the motion sensor if nec-
essary.
Sensor
cable fault
Warning
Motion sensor data error. Related to the
motion sensor. Check the motion sensor operation and
wiring.
Replace the motion sensor if nec-
essary.
Sensor
comms error
Fault
Motion sensor communication error. Related
to the motion sensor. Check the motion sensor operation and
wiring.
Replace the motion sensor if nec-
essary.
Sensor data
error
Warning
Signal failure between motion sensor and
tachograph. Related to the motion sensor. Check the motion sensor operation and
wiring.
Replace the motion sensor if nec-
essary.
Check for evidence of tampering.
If the error remains active for no appar-
ent reason, decommission and replace
the tachograph.
Sensor
fault
Fault
A data link error between the motion sensor
and the tachograph. Related to the motion Check the motion sensor operation and
all wiring. - replace sensor if faulty
- 29 -