Stoneridge SE5000, Control Manual

Page: 19 / 34

Printouts
Printouts
The information stored on the tachograph and on the driver cards can be printed. There are a number of dif-
ferent printouts available, see below.
1. Press OK to show the menu and select:
PRINT
1. Press OK and select the type of printout to make. Then press OK .
Some types of printouts require specification of the driver card and a date. If so the following is displayed:
Select card 1 or 2
2. Select 1 to make a printout for the current driver's card or 2 to make a printout for a co-driver's card. The fol-
lowing is displayed:
Select date
3. Select the desired date by using the arrow buttons and press OK .
4. Now you select whether to view the data on the display only or to make a printout on paper.
l
To view the data on the display only, select:
display
l
Press OK and scroll through the data using the arrow buttons and then press OK to return.
l
To make a printout on paper, select
printer
l
Press OK . The display will show:
Printer busy
l
If you would like to cancel the process, press and hold the Back button. Wait until the message is cleared
and then pull the printout upwards to tear it off.
Note!
To avoid paper jam make sure the slot on the paper cassette is not blocked.
Printout Examples
On the following pages there are a number of printout examples that can be selected from the
PRINT
menu:
l
Daily printout (card)
24h card
(including local time).
l
Event and faults (card)
event card
.
l
Event and faults (VU)
event vu
.
l
Drive Time Info drive time info
l
Technical data technical data .
l
Overspeeding overspeeding .
l
Vehicle speed vehicle speed .
l
Engine speed (rpm) engine speed .
l
Status D1/D2
status D1/D2
.
l
Manual Entry Sheet
man entry sheet
.
- 17 -