Step 3: Locking Tabs
Both StoneFly Storage Concentrator rails have a locking tab, which serves two functions.
The first is to lock the Storage Concentrator into place when installed and pushed fully into
the rack, which is its normal position. Secondly, these tabs also lock the Storage Concen-
trator in place when fully extended from the rack. This prevents the Storage Concentrator
from coming completely out of the rack when you pull it out for servicing.
Installing the Storage Concentrator into the Rack
You should now have rails attached to both the Storage Concentrator and the rack unit.
The next step is to install the Storage Concentrator into the rack.
1.
Do this by lining up the rear of the chassis rails with the front of the rack rails.
2.
Slide the chassis rails into the rack rails, keeping the pressure even on both sides
(you may have to depress the locking tabs when inserting). See Figure 3. When the
Storage Concentrator has been pushed completely into the rack, you should hear the
locking tabs "click".
Figure 4: Installing the Rack Rails
USO-HA
Quick Start Guide
9