Stone RP850D, Operator'S Manual

Page: 30 / 36

- 30 -
MAINTENANCE RP850G / RP850D
Danger:
- NEVER use fuel or cleaning solutions with a
low flash point for cleaning the filter
element!
- DO NOT smoke in the working area, avoid
open fire and sparks - fire and explosion
hazard!
- Hazard of eye injuries - use safety goggles!
1. Soak the filter element (3) with clean motor
oil, squeeze out excess oil.
2. Replace the filter element (2 & 3).
3. Fit the cover (1) and fasten.
MAINTENANCE WORK (Hatz Engine)
Attention: Only the maintenance work that has to be
performed daily is included in this operating manual.
Please refer to the engine operating manual and to the
maintenance instructions and intervals listed therein.
Filling up with fuel
Danger:
- Fill fuel tank only when engine is switched
OFF.
- No naked flames.
- No smoking.
- NEVER fill fuel tank in enclosed areas.
To check fuel level:
1. Clean the area around the fuel filling socket.
2. Open the cap.
3. Check the fuel level visually.
4. If necessary, fill up with fuel (diesel).
Checking the engine oil level
1. Position the vibration plate so that the motor is
in a vertically upright position.
2. Clean around the dipstick area.
3. Pull out dipstick (1) and wipe clean.
4. Push dipstick back in with twisting movement
by hand then pull out again with similar
twisting movement.
5. Read off the oil level on the dipstick and, if
necessary, top to the “maximum” mark.
Cleaning the dry air filter
The maintenance intervals for the filter cartridge
depend on the amount of dust. A blocked filter is
apparent from a lack of performance and/or black
smoke.
1. Unscrew lid of air filter (1).
2. Remove filter cartridge (2).