Stone RP850D, Operator'S Manual

Page: 21 / 36

- 21 -
OPERATION
RP850G / RP850D
DO NOT adjust pressure relief valves.
Drain hydraulic oil at operating temperature.
CAUTION - risk of scalding!
Collect discharging hydraulic oil and dispose of the
same in an environmentally-friendly manner.
DO NOT start the engine with hydraulic oil drained!
After completing all work (with the system still
pressureless), inspect all connections and bolted
connections for leaks.
Inspect all hoses and bolted connections for leaks at
regular intervals (depending on time used), even when
no safety-related faults are visible.
Before working on the electrical system of the
machine, disconnect the battery and insulate by
covering or remove.
Inspect the electrical equipment of the machine at
regular intervals. Faults such as loose connections,
worn or scorched cables must be remedied
immediately.
HANDLING BATTERIES
Transport filled batteries upright to prevent acid
spillage.
During transport, secure the battery to prevent it from
tilting, short-circuit, slipping and damage.
Keep away from sparks, naked flames and other
sources of ignition.
DO NOT place any tools on the battery.
Avoid contact of acid with skin and clothing. In case
of contact, wash off acid immediately with clean water
and seek medical advice.
Dispose of unused batteries in a proper manner.
Properly refit and inspect all protective devices after
maintenance and repairs.
TESTING
Road rollers, trench rollers and vibrating plates must be
tested for safety by an expert depending on the
particular application and operating conditions as
required, however at least once a year.
EQUIPMENT OVERVIEW
1. Engine
2. Central point suspension
3. Tow-bar
4. Operating control/tow-bar
5. Base plate with exciter
OPERATING CONTROL AT THE TOW-BAR
I. Forward
II. Reverse