background image

-  4  -

Foreword

User Information

These instructions include:

Safety regulations

Operating instructions

Maintenance instructions

These instructions have been prepared for operation

on the construction site and for the maintenance

engineer.

These instructions are intended to simplify operation of

the machine and to avoid malfunctions through im-

proper operation.

Observing the maintenance instructions will increase

the reliability and service life of the machine when used

on the construction site and reduce repair costs and

downtimes.

Always keep these instructions at the place of use of

the machine.

Only operate the machine as instructed and follow

these instructions.

Observe the safety regulations as well as the guide-

lines of the civil engineering trade association.

Observe safety rules for the operation of equipment

and the pertinent regulations for the prevention of

accidents.

Stone Construction Equipment, Inc. is not liable for the

function of the machine when used in an improper

manner and for other than the intended purpose.

Operating errors, improper maintenance and the use of

incorrect operating materials are not covered by the

warranty.

The above information does not extend the warranty

and liability conditions of business of Stone Construc-

tion Equipment, Inc.

Stone Construction Equipment, Inc.

P.O. Box 150, Honeoye, New York  14471

Phone:  (800) 888-9926

   Fax:   (585) 229-2363

Please enter the following data.  This will help

expedite any service or warranty work.

1. Machine Type:__________________________

Machine S/N: __________________________

2. Engine Type: ___________________________

Engine S/N: ____________________________

3. VIN: _________________________________

4. Purchase Date:__________________________

5. Dealer/Distributor Information:

Name: ________________________________

Address:_______________________________

______________________________________

Phone #:_______________________________

Fax #: _________________________________

6. Battery

Manufacturer:___________________________

Battery Type: ___________________________

Battery S/N: ____________________________

Location of above information:

1. Information on S/N tag.

2. Information on engine tag.

3. Information on S/N tag - if applicable.

4. Date you purchased machine.

5. Dealer machine was purchased from.

6. Information on battery and battery warranty card.

Summary of Contents for CF24E

























Reviews: