STOLZENBERG KSE 910, Operating Manual

Page: 14 / 18

14
Malfunctions / error messages and
troubleshooting
Error
Possible causes
Possible remedies
Electrical actuators
are not working After charging, the battery charging
plug was not connected with the
on-board charger plug Reinsert the battery charging plug
Battery is discharged or not
correctly connected Charge the battery and connect it
The hood is still open
Close the hood
Fault in the electrical cables Check all the plug-and-socket joints and
restore the contact
Sweeping result
not satisfactory
Side brushes or brush rollers not
lowered Lower
Side brushes or brush rollers worn Readjustment and if required,
replacement of the brushes
Trajectory clogged by dirt Check and clean the roller space
Brush rollers are stuck because of
dirt, cables, strings or something
similar Clean the brush rollers and roller
bearings,
check the bearings for
damage
Side brushes are stuck because of
dirt, cables, strings or something
similar Check the side brushes and remove
whatever is stuck
Side brushes and/or roller belts are
worn
Control and replacement of the belts
Fault in the
traversing
mechanism
Traversing mechanism not
correctly set
Set traversing mechanism (see page 11)
Traversing mechanism belt worn
Checking and replacement of the belt
Blockage of the driving roller or the
running wheels owing to dirt
Remove blockage
Heavy dust
accumulation while
sweeping
Filter heavily soiled Clean the filter (see page 10)
Filter used up / Filter material worn
Check and replace filter
Filter not correctly fitted
Correct filter position
Leaks and result suction of impure
air in the area of the filter chamber
Check for suction of impure air
Filter box not inserted correctly Check if it fits tightly