STODDART Giorik Minitouch KM061WT Specification, Installation & Operation Manual Download | Manualshive

Page: 19 / 56

background image

Page 18

Due to continuous product research and development,
the information contained herein is subject to change without notice.

www.stoddart.com.au
www.stoddart.co.nz

Installation

Electrical Connection

Optional Condensate Hood - CEH.KOR.11.1

Information

For further information on installing/operating the Condensate Hood refer to the user manual supplied with condensate hood.

Supplied with an appropriately rated plug and lead fitted and be indicated as:

•  6 pin plug & lead fitted
•  Position the compact hood on top of the oven
•  Connect the 6 pin plug to the 6 pin plug located on the back of the oven
•  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a

hazard. Please contact Stoddart for parts and we will advise how to do this in order to avoid any electrical hazard

• The power cable should be dry and/or isolated from moisture or water

Some procedures in this manual require the power to the equipment to be turned

off and isolated. Turn the power OFF at the power point and unplug the power

supply lead by the plug body. If the power point is not readily accessible turn the

equipment off at the isolation switch or the circuit breaker in the switchboard.

Attach a yellow “CAUTION-DO NOT OPERATE” tag. This must be performed

where relevant unless the procedures specify otherwise.

FAILURE TO DO SO MAY RESULT IN ELECTRIC SHOCK.

WARNING

WARNING

This unit must be installed in accordance with AS/NZS 60335.1

6 Pin Connection

«
...
17
18
19
20
21
...
»

Summary of Contents for Giorik Minitouch KM061WT

























































Reviews:

No comments

Related manuals for Giorik Minitouch KM061WT

SpacemakerXL JVM1631

Brand: GE Pages: 40

Brand: Oster Pages: 17

Brand: Jenn-Air Pages: 96

Brand: GE Pages: 28

Brand: NEFF Pages: 72

Brand: V-ZUG Pages: 56

Brand: GE Pages: 20

Brand: Garland Pages: 16

G3FERRARI G10029

Brand: TREVIDEA Pages: 48

Brand: Jade Pages: 32

Brand: Casselin Pages: 73

Brand: OK. Pages: 75

Brand: Fakir Pages: 16

Brand: Electrolux Pages: 164

Brand: Electrolux Pages: 44

Brand: Electrolux Pages: 52

Brand: Electrolux Pages: 108

Brand: Electrolux Pages: 132

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands