Page 13
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
External Surfaces
Filter Trap
Filter Trap
1� Isolate from the power supply
2� Wipe clean using a cloth dampened with clean warm water until all soil has been removed (Care should be taken to avoid wetting the
electronic controller)
3� Using a clean sanitised cloth, thoroughly wipe the stainless steel and metal parts dry� Do NOT let water pool on the unit� Check crevices
and folds
1� Isolate from the power supply
2� Manually remove the wash pump filter trap in the front right hand position of the washing chamber
3� Wash and clean the filters under a tap with fresh water
4� Carefully replace all filters inside the unit
1� Water Flow Plug
2� Outer Filter Trap
3� Inner Filter Trap
The filter trap is located in the front right corner of the chamber�
1
2
3
Cleaning and Maintenance
