STODDART Culinaire EVO40ST Specification, Installation And Operation Manual Download Page 13

Page 12

Due to continuous product research and development,
the information contained herein is subject to change without notice.

www.stoddart.com.au
www.stoddart.co.nz

IMPORTANT

Threaded fasteners can loosen in service. 

Regular inspection and adjustment 

should be carried out as required  

WARNING

This unit is NOT waterproof, do NOT 

hose. DO NOT pour water directly onto 

the unit. DO NOT immerse in water

IMPORTANT

Some commercial stainless steel 

cleaners leave residue or fi lm on the 

metal that may entrap fi ne particles of 

food, deeming the surface not 

FOOD SAFE

WARNING

Wait until the unit has cooled to a safe 

temperature before undertaking any 

cleaning or maintenance. Contact with 

hot surfaces can cause burns and 

serious injury

•  Cleaning is recommended for health and safety purposes and to prolong the life of the unit

•  DO NOT

 use abrasive pads or cleaners on the stainless steel or any other metal parts of the unit

•  DO NOT

 use industrial chemical cleaners, fl ammable cleaners, caustic based cleaners or bleaches and bleaching agents, as many will 

damage the metals and plastics used on this unit

•  DO NOT

 remove any screws and/or panels for cleaning (unless directed)

•  This unit is 

NOT

 waterproof, 

DO NOT

 hose, 

DO NOT

 pour water directly onto the unit, 

DO NOT

 immerse in water

•  Stainless steel exhibits good resistance to corrosion however, if not properly maintained stainless steel can rust and/or corrode
•  Any sign of mild rust and/or corrosion should be thoroughly cleaned with warm soapy water and dried as soon as possible
•  NEVER use abrasive pads or cleaners for cleaning
•  All metal surfaces should be checked while cleaning for damage, scuffs or scrapes as these can lead to rust and further damage to the 

product

•  Mild rust and/or corrosion can be treated with a commercial cleaning agent that contains citric/oxalic/nitric/phosphoric acid�

DO NOT

 use cleaning agents with chlorides or other harsh chemicals as this can cause corrosion�

After treatment, wash with warm (not hot) soapy water and dry thoroughly

•  Thoroughly wipe the surfaces dry after cleaning� 

DO NOT

 let water pool on the unit� Check crevices and folds for pooling

•  When using, ensure all liquids and moisture is cleaned up straight away�

Food liquids such as juices from vegetables and fruits should not be left on preparation surfaces

•  DO NOT

 leave items on the stainless steel such as cutting boards, rubber mats and bottles

•  To protect the polished surface of the stainless steel, it should be dried using a clean dry soft cloth� A light oil can be applied to enhance 

the stainless steel surface, using a clean cloth apply the oil in the same direction as grained polished fi nish

•  Some commercial stainless steel cleaners can leave residue or fi lm on the metal; this may trap fi ne particles of food on the surface, 

thus deeming the surfaces not food safe

General Information

Corrosion Protection

Surface Finish

Cleaning and Maintenance

Materials Required

•  Stainless Cleaner
•  Non Abrasive Cleaning pad
•  Clean Sanitised Cloth

•  Paper Towel
•  Container of warm water
•  Appropriate PPE (Personal Protective Equipment)

Cleaning and Maintenance Schedule

•  Daily cleaning is required for the unit� This will help to maintain and prolong the efficiency of your unit
•  The unit should be cleaned at the end of each work day

Cleaning

Summary of Contents for Culinaire EVO40ST

















Reviews: