3
3.1 General information
Congratulations on your Fan Jet Duo purchase;
Please check the machine for any transport damage upon receipt and advise your supplier of any problems
Immediately. Late claims regarding any damage may be rejected.
IMPORTANT
This Operating Manual forms part of the machine and must be readily available for the operator who
must read and follow the points covered before use
3.2 Technical data
Model: Fan Jet Duo Plus VS-2
Hopper capacity: 2 x 65 litre or 2 x 130 litre
65 litre machines: Net weight:90kg Dimensions (W x D x H) 50cm x 56cm x 82cm (boxed 52cm x 58cm x 85cm)
130 litre machines: Net weight:98kg Dimensions (W x D x H) 61cm x 61cm x 95cm (boxed 62cm x 62 x 98cm)
Max. spreading width: 36 m
Recommended working width: 18 –36m
*
Operating Voltage 12v; Power requirement 60 amps Motor outputs: 720 watt
Max. disc speed: 5200 rpm
*
Noise level: 95dB
* Combined data for both left and right hand machines
3.3 Intended use
This 12v applicator has been designed to apply large dense slug pellets from 18m to 36m in the agricultural,
horticultural and amenity sector and can be mounted to operate facing forwards or backwards.
Any other use is considered to be unintended and the manufacturer will not be liable for any resulting damage.
If mounting to a self propelled crop sprayers or tractor front linkage we recommend the use of our purpose built
Central Mounting Beam and for suitable UTV vehicles our UTV fitting kit (see page 10)
NOTE - when fitting to a UTV vehicle
the minimum alternator output required is
55amps
and the maximum
spread width is limited to
32m
due to the power supply available and height of machine when mounted.
The operator alone bears the associated risk if used for unintended use.
Intended use also includes compliance with the conditions for operation, maintenance, and repairs.
The implement may only be used, maintained and repaired by persons who have relevant experience and aware
of the risks involved.
The manufacturer is not liable for any resulting damage if the machine is used for any other purpose than the
intended use also includes compliance with the conditions for operation, maintenance, and repairs prescribed
within this instruction manual .
This machine should not be used in the rain or during a thunderstorm.
The applicable accident prevention regulations as well as the other generally safety-related, occupational health
and road traffic regulations must also be observed.
Specifications descriptions and illustrations in this manual are accurate at the time of this publication but may be
subject to change these manual was correct at the time of printing but we reserve the right to change and im-
prove them. This machine is designed with safety in mind.
Maintenance and servicing in accordance with this manual will ensure safe operation and reliability of your
machine for many years
3 .4 Unintended use
This machine is not designed to apply abrasive materials such as sand & grit or for applying salt products
NOTE
It is the responsibility of the operator to ensure the appropriate personal protection
equipment be worn for the material being applied. If unsure contact the material supplier for more
information.
Please contact us if you still have questions regarding the machine operation before use
Stocks AG Ltd , Cromwell Road, Wisbech, Cambridgeshire UK
Tel: 00 44 (0) 1945 464 909 email: [email protected]
Summary of Contents for Fan Jet Duo Plus VS-2 130
Page 23: ...23 22 Parts drawing...
Page 30: ...30 29 Notes page...
