19
18 Calibration Hopper
Fitting Instructions
1.
With an empty hopper, remove the feed block assembly
from one of the Fan Jets.
2.
Slide the Calibration Hopper into the Fan Jet in place of
the feed block with the hopper uppermost, ensure the drive
shaft aligns and secure with the supplied screw knobs.
4.
Secure with the two small blacks PVC knobs supplied.
3.
Insert the (removed) feed block into the Calibration
Hopper, ensure the drive shaft aligns by slowly rotating the
feed shaft
5.
Place a suitable container under the Calibration Hopper to collect pellets whilst calibrating
Supplied as standard with this
machine (packed in hopper)
Part No. FJ-005-CAL-DUO
Summary of Contents for Fan Jet Duo Plus VS-2 130
Page 23: ...23 22 Parts drawing...
Page 30: ...30 29 Notes page...
