1
2
3
magnetic surface
Silicon or similar
Suitable fixing
Bezel
Optic
Retaining collar
Body
OPTIC CHANGE
To change the optic unscrew the front bezel, remove the
black lens retaining collar and let the optic drop out.
Repeat the process in reverse to fit the new optic.
Warning - Failure to tighten the bezel fully may result in
premature failure of fitting.
After opening the sealed portion of the luminaire for any
reason, MSL recommends running the fitting for 15
minutes with the lid open to expel moisture before closing
it up. This will prevent condensation on the lens and
protect the fitting from corrosion.
WARNING: Do not look at exposed LED lamps in
operation. Eye injury can result.
Ø17mm
Mini Module.pdf 3 11/12/2019 17:27:43
