Figure 2.
Connection between the STEVAL-IDB007V1 and PC
RELATED LINKS
4.1 BlueNRG cold start configuration on page 14
1.5
NUCLEO-L152RE plus X-NUCLEO-IDB05A1 board setup
Connect the STM32
NUCLEO-L152RE
+
X-NUCLEO-IDB05A1
(
BlueNRG-MS
board) thanks to a USB cable. The
USB cable is used for two purposes:
1.
Providing power supply to the
NUCLEO-L152RE
+
X-NUCLEO-IDB05A1
board
2.
Helping in serial communication of data between the PC and the boards
NUCLEO-L152RE
+
X-NUCLEO-
IDB05A1
The STM32
NUCLEO-L152RE
board integrates the ST-LINK/V2-1 debugger/ programmer. You can download the
relevant version of the
STSW-LINK009
ST-LINK/V2-1 USB driver (according to your version of Windows).
Note:
Ensure that
BlueNRG-MS
is updated with BLE stack version 7.2 c or higher. You can use
BlueNRG GUI
to
manage the update.
UM2295
NUCLEO-L152RE plus X-NUCLEO-IDB05A1 board setup
UM2295
-
Rev 1
page 4/35
