DocID025832 Rev 5
115/117
STM32F042x4 STM32F042x6
Revision history
116
26-Oct-2015
3
–
Table 9: STM32F042x4/x6 I
2
C implementation
- adding 20 mA
Updates in
Section 4: Pinouts and pin descriptions
–
Table 12: Legend/abbreviations used in the pinout table
- removing
“I” pin type
Updates in
Section 5: Memory mapping
:
–
Figure 10: STM32F042x6 memory map
, x4 difference described in
text
Updates in
Section 6: Electrical characteristics
:
– the condition “Regulator in run mode, all oscillators OFF” in
Table 28:
Typical and maximum consumption in Stop and Standby modes
,
– footnote for V
IN
max value in
Table 18: Voltage characteristics,
– footnote for max V
IN
in
Table 21: General operating conditions
,
– t
START
parameter definition in
Table 25: Embedded internal
reference voltage
– addition of t
START
parameter in
Table 25: Embedded internal
reference voltage,
removal of -40°C to 85°C condition and the
associated footnote
–
Table 26: Typical and maximum current consumption from VDD
supply at VDD = 3.6 V:
removing “code executing from Flash or
RAM”
– removal of the min value for t
START
parameter in
Table 57: TS
characteristics
– the typical value for R parameter in
Table 58: VBAT monitoring
characteristics
– removal of Res
TM
parameter line from
Table 59: TIMx characteristics
and putting all values in new Typ column, substitution of t
COUNTER
with t
MAX_COUNT,
values defined as powers of two
– V
ESD(CDM)
class in
Table 47: ESD absolute maximum ratings
– reorganization of
Table 64: I
2
S characteristics a
nd filling max value
of t
v(SD_ST)
– adding definition of levels in
Figure 32: I
2
S master timing diagram
(Philips protocol)
Updates in
Section 7: Package information
:
– heading and display of columns in
Table 68: WLCSP36 package
mechanical data
.,
– Figure 38: UFQFPN48 package marking example
– Figure 41: WLCSP36 package marking example
– Figure 50: UFQFPN28 package marking example
– Figure 41: WLCSP36 package marking example
–
Figure 51: TSSOP20 package outline
- correcting GAGE to GAUGE
– removing “die 445” from
Table 74: Package thermal characteristics
Updates in
Section 8: Part numbering
:
– adding tray packing to options
Table 76. Document revision history (continued)
Date
Revision
Changes
