STMicroelectronics STM3210E-EVAL, User Manual

Page: 13 / 48

UM0488 Hardware layout and configuration
Doc ID 14220 Rev 5 13/48
2.16 Development and debug support
The two debug connectors available on the STM3210E-EVAL evaluation board are:
●
CN9: standard 20-pin JTAG interface connector, compliant with ARM7/9 debug tools.
● CN7: SAMTEC 20-pin connector FTSH-110-01-L-DV for both SWD and Trace,
compliant with ARM CoreSight debug tools.
2.17 Display and input devices
The 240x320 TFT color LCD connected to bank1 NOR/PSRAM4 of FSMC interface of the
STM32F103ZGT6 and four general purpose color LEDs (LD 1,2,3,4) are available as
display devices. A 4-direction joystick with selection key, general purpose button (B4),
wakeup button (B2) and tamper detection button (B3) are available as input devices.
The jumper JP4 should be kept open to enable the wakeup button B2 which shares the
same I/O with USART2 and motor control connector.
The STM3210E-EVAL evaluation board also supports a second optional 122x32 graphic
LCD that can be mounted on the U18 connector. By default, the graphic LCD is not present.
Table 12. LCD modules
TFT LCD CN16 (default) Graphic LCD U18 (optional)
Pin on
CN16
Description Pin connection
Pin on
U18
Description Pin connection
1 CS
CS of Bank3 of
FSMC
1 Vss GND
2 RS FSMC_A0 2 Vcc 3.3V
3 WR/SCL FSMC_NWE 3 VO -
4 RD FSMC_NOE 4 CLK PA5
5 RESET RESET# 5 SID PA7
6 PD1 FSMC_D0 6 CS PF10
7 PD2 FSMC_D1 7 A +5V
8 PD3 FSMC_D2 8 K GND
9 PD4 FSMC_D3
10 PD5 FSMC_D4
11 PD6 FSMC_D5
12 PD7 FSMC_D6
13 PD8 FSMC_D7
14 PD10 FSMC_D8
15 PD11 FSMC_D9
16 PD12 FSMC_D10
17 PD13 FSMC_D11
18 PD14 FSMC_D12
Downloaded from Elcodis.com electronic components distributor