STMicroelectronics ST62GP-EMU2 HDS2 Series User Manual Download Page 52

Page: 52 / 58

Distributor of STMicroelectronics: Excellent Integrated System Limited

Datasheet of ST62GP-EMU2 - KIT EMULATOR FOR ST6 MCU SER
Contact us: [email protected] Website: www.integrated-circuit.com

ST62GP-EMU2 Emulator User Manual

Appendix B: Glossary

51/57

Starter Kit

A printed circuit board for microcontroller evaluation and programming. It has the

ability to program one DIP EPROM or OTP part at a time. Different starter kits are

available for programming different ST6 devices.

ST6 HDS2 Series

The ST6 HDS2 Series is a generic name covering several emulator versions each

of which have a specific dedication board to support a set of ST6 devices.

ST62GP-EMU2

The ST62GP EMU2 is the order code of this specific ST6 HDS2 emulator version

with a dedication board for the ST620x, ST621x, ST622x, ST623x, ST625x,

ST626x and ST6218/28 device families.

Target Board

Designates your application board. It should include a socket for inserting the ST6

device or the emulator probe.

WGDB6

Windows GNU Debugger for ST6. This is a software tool running under Windows.

It is the main user interface when operating the ST6-HDS2 emulator, and is part of

the ST6 software development tool chain (editor, assembler, linker and debugger).

WGDB6 is supplied on the CD-ROM with the ST6-HDS2 emulator and must be

installed on your development PC.

52 / 58

Summary of Contents for ST62GP-EMU2 HDS2 Series



























































Search results

Summary of Contents for ST62GP-EMU2 HDS2 Series

Reviews:

Related manuals for ST62GP-EMU2 HDS2 Series

Brands by name

Popular brands

STMicroelectronics ST62GP-EMU2 HDS2 Series, User Manual

Search results

Summary of Contents for ST62GP-EMU2 HDS2 Series

Reviews:

Related manuals for ST62GP-EMU2 HDS2 Series

Brands by name

Popular brands