STMicroelectronics ST62GP-EMU2 HDS2 Series, User Manual, Page: 58 / 58

Share

43 pages before
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58

Page: 58 / 58

STMicroelectronics ST62GP-EMU2 HDS2 Series User Manual Download Page 58

Distributor of STMicroelectronics: Excellent Integrated System Limited

Datasheet of ST62GP-EMU2 - KIT EMULATOR FOR ST6 MCU SER
Contact us: [email protected] Website: www.integrated-circuit.com

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result f rom its use.
No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this
publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
STMicroelectronics products are not authorized for use as critical components in life support devices or systems without the express written
approval of STMicroelectronics.

The ST logo is a registered trademark of STMicroelectronics.

Intel

®

is a U.S. registered trademark of Intel Corporation.

Microsoft

®

, Windows

®

and Windows NT

®

are U.S. registered trademarks of Microsoft Corporation.



2000 STMicroelectronics - All Rights Reserved.

Purchase of I

2

C Components by STMicroelectronics conveys a license under the Philips I

2

C Patent. Rights to use these components in an

I

2

C system is granted provided that the system conforms to the I

2

C Standard Specification as defined by Philips.

STMicroelectronics Group of Companies

Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain

Sweden - Switzerland - United Kingdom - U.S.A.

http://www.st.com

5

7

58 / 58

58 / 58

«
...
56
57
58

Summary of Contents for ST62GP-EMU2 HDS2 Series



























































Reviews:

No comments