background image

8

SpeedTech Lights, Inc © 2019 

VIRTUE

®

 1

DASH LIGHT

Flash Pattern List

•  Steady Burn

•  Slow Quint Flash

•  Slow Quad Flash

•  Slow Triple Flash

•  Slow Double Flash

•  Fast Triple Flash

•  Fast Double Flash

•  Fast Single Flash

•  Slow Single Flash

•  Slow Quad Flash (Long Pause)

•  Slow Triple Flash (Long Pause)

Flash Pattern Shortcuts

•  Hold for 3 seconds to toggle Steady Burn mode.

•  Hold for 4 seconds to toggle Random pattern mode.

About Flash Patterns

• 

All STL LED products are equipped with a non-volatile memory which will recall the last flash pattern when the Light Bar is turned on. 

• 

Set the flash pattern by pushing the Flash Pattern button on the Cigarette Lighter Plug to cycle through the various patterns.

• 

If you are not using the Cigarette Lighter Plug, follow the wiring diagram to identify the Flash Pattern wire to manually cycle through 

patterns.

All rights reserved. No part of this Instruction Manual may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means, 

including but not limited to photocopying, recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without 

the express prior written consent of SpeedTech Lights, Inc, except for non-commercial purposes as permitted by United States copyright law. Customers 

of SpeedTech Lights, Inc, may download and print this Instruction Manual for use with products sold to the customer by SpeedTech Lights, Inc. However, 

no part of this Instruction Manual may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred, in any form or by 

any means, except with the prior written consent of SpeedTech Lights, Inc.

Summary of Contents for VIRTUE 1









Reviews: