PRE-ASSEMBLY
CHANGING THE ROLLER HINGE SETTING
• Stand with your legs on either side of the Main
Shaft.
• Reach under each Roller Hinge with your index
fi
ngers.
Use your thumbs to release the locks over the Roller
Hinges (See Figure 23).
• Lift both sides of the table out of the A-frame at the
same time. You may rest the table on the crossbar
of the A-frame.
• Unlock the cam locks for each Roller Hinge.
Change the Roller Hinges to the desired setting (A,
B, or C) (Figure 23A).
• Re-lock the cam locks. Replace the Roller Hinges
into the hinge plates of the A-frame.
STORING THE INVERSION TABLE
• Pull the height selector locking pin and slide the
Main Shaft in all the way to the Ankle Lock System.
Engage the pin in the storage setting.
• Rotate the table opposite from use until the table
has turned 180 degrees and rests against the cross
bar on the A-frame.
• The legs of the A-frame base may then be folded
together for compact storage. (See Figure 24).
WARNING:
This operation may pinch
fi
ngers if not
done slowly and carefully.
USING THE PILLOW/ADJUSTING THE TABLE BED
• Your FitSpine™ table comes with a Lumbar Pillow
(IA-1105B) for added comfort during inversion. If
you wish to use it, simply slide the pillow under the
top
fl
ap of the bed.
• When you remove the pillow, you may readjust the
top
fl
ap. Simply undo the
fl
ap from the Velcro® at
the bottom of the Table Bed and tighten as needed
(Figure 25).
POST-ASSEMBLY
t p
S
ne
S Y S T E M
T M
Figure 23
Figure 24
Figure 25
Velcro Flap
ADJUSTMENTS / MAINTENANCE / STORAGE
A B C
Figure 23A
14
WARNING
- To reduce the risk of injury to persons:
• Read and understand all the instructions, view the instructional video, review all other accompanying
documents, and inspect the equipment before using the inversion table. It is your responsibility to
familiarize yourself with the proper use of this equipment and the inherent risks of inversion, such as
falling on your head or neck, pinching, entrapment, or equipment failure. It is the responsibility of the
owner to ensure that all users of the product are fully informed about the proper use of the equipment
and all safety precautions.
• Close supervision is necessary when the inversion table is used near children, or by or near invalids
or disabled persons.
• Use the inversion table only for its intended use as described in this manual.
DO NOT
use attachments
not recommended by the manufacturer.
•
NEVER
drop or insert any object into any opening.
•
DO NOT
use or store product outdoors.
•
DO NOT
use if you are over 6 ft 6 in (198 cm) or over 300 lbs. (136 kg). Structural failure could occur
or head/neck may impact the fl oor during inversion.
•
DO NOT
allow children to use this machine.
• Keep children, bystanders, and pets away from machine while in use.
• Keep body parts, hair, loose clothing and jewelry clear of all moving parts.
• The inversion table has no user serviceable parts.
• This product is intended for indoor home use only.
DO NOT
use in any commercial, rental or institutional
setting.
•
DO NOT
use the equipment without a licensed physician’s approval and a review of the medical
contraindications, as noted in the Owner’s Manual.
• Failure to assemble and/or use the equipment as directed may void the manufacturer’s warranty on this
product and could result in injury or death.
• Choose a level surface for assembling and operating the table.
• Follow each step in sequence.
DO NOT
skip ahead.
• Make sure that all fasteners are secure.
•
ALWAYS
test and inspect the table. Make sure the table rotates smoothly to inverted position and back.
•
ALWAYS
replace defective components immediately and/or keep the equipment out of use until repair.
FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD
RESULT IN SERIOUS INJURY OR DEATH.
Before you begin:
Review all steps before beginning assembly and read all
precautions before using the inversion table. Carefully adhere to the Assembly
Instructions and Owner’s Manual to help ensure user safety and product integrity.
WARNING
!
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE.
3
