STK Professional Audio VM-8DRV, Owner'S Manual

Page: 28 / 32

28
♪
Input specifications.
♪
Output specifications.
Specifications
VM/VRM11S,11T-DRV
Input terminals
Actual Load
Impedance
For use with
nominal
Input level
Connector in mixer
Sensitivity
Nominal
(limit)
Max. before
clip(Main Out)
MIC IN (1-9)
LOW IMPEDANCE
4 kohms
600
ohms mic
-50 dBu
(2.45 mV)
¡¾1 dB
-34 dBu
(15.5 mV)
XLR Jack
LINE IN (1-7)
LOW IMPEDANCE
4 kohms
600
ohms lines
-20 dBu
(24.5 mV)
¡¾1 dB
-14 dBu
(154 mV)
Phone Jack
LINE IN (8-11)
LOW IMPEDANCE
4 kohms
600
ohms lines
-10 dBu
(245.0 mV)
¡¾1 dB
-14 dBu
(154 mV)
Phone Jack
AUX IN 10 kohms
600
ohms lines
-10 dBu
(245.0 mV)
¡¾1 dB
6 dBm
(1.5 V)
Phone Jack
TAPE IN
10 kohms
600
ohms lines
-10 dBu
(245.0 V)
¡¾1 dB
6 dBm
(1.5 V)
RCA Jack
NOTE: (1) Sensitivity is the lowest level that will produce a full power output, or the nominal
output level when the unit is set to maximum gain.
(2) XLR connectors are balanced. Phone jacks are unbalance
d.
Output terminals
Actual Load
Impedance
For use with
nominal
Output level
Connector in mixer
Nominal Max. before clip
SPEAKER OUT 0.08 ohm
4 ohms SP 300 W 314 W Phone Jack
8 ohms SP 200 W 200 W Phone Jack
MAIN OUT 600 ohm 100k ohms lines
+4dBu
(1.2 V)
+20 dBu
(8.3 V)
Phone Jack
MONITOR OUT
600 ohm 100k ohms lines
+4dB
(1.2 V)
+20 dBu
(8.3 V)
Phone Jack
EFX OUT 600 ohm 100k ohms lines
+4dBu
(1.2 V)
+20 dBu
(8.3 V)
Phone Jack
TAPE OUT 600 ohm 100k ohms lines
-10dBu
(245 mV)
+12 dBu
(3.07 V)
RCA Jack
NOTE: (1) All connectors are unbalanced.