15
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: VC-001 PRODUCT CODE: 51388 11/2015
Instructions (Cont.)
Cleaning the in-tank filter
• Take the dust tank out of the vacuum (as
described on page 13) and empty it.
• Unclip the dust release latch to open the
bottom of the dust tank (Fig. 13).
• Take out the plastic in-tank filter (Fig. 14)
and wash the disassembled parts under
running water with a soft brush or cloth.
• Wipe the dust tank with a soft cloth.
• Leave the parts to dry completely
before putting them back into place in
the vacuum cleaner body, following the
steps above in reverse order.
Cleaning the exhaust filter
• Press the release latch and take off the
cover to the exhaust filter compartment
(Fig. 15).
• Remove the filter housing (Fig. 16), take
out the foam filter and wash it under
running water.
• Allow the filter to dry completely before
replacing it in the vacuum cleaner.
IMPORTANT!
• Only use the vacuum cleaner with
all filters intact, in dry condition and
correctly installed.
• Replacement filters are available
from our after sales support centre.
Contact us on 1300 886 649 to
purchase replacements.
• Make sure that the openings of the
vacuum cleaner are not clogged or
obstructed. Otherwise the vacuum
cleaner might get damaged.
Fig. 13
Fig. 14
Fig. 15
Fig. 16
