11
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: VC-001 PRODUCT CODE: 51388 11/2015
Cord release and rewind
• Holding the power plug firmly, pull it to fully
unwind the cord (Fig. 3, G). A yellow mark on
the power cord indicates the recommended
cord length. It is followed by a red mark – do
not pull the cord out past the red mark.
• Position the cord so no one is likely to trip
over it.
• To rewind the power cord, press the cord
retraction pedal (Fig. 3, F).
CAUTION:
Take care, the cord retracts very
quickly. Guide it with one hand to prevent
the cord from whipping, which could cause
damage or injury.
Carry handle
• When carrying the vacuum cleaner, use the
handle on top of the unit (Fig. 3, B).
• Do not carry the vacuum by the dust tank
handle (Fig. 3, E) to avoid accidentally
pressing the dust tank release button
(Fig. 3, D) and dropping the appliance.
Switching on and off
• Insert the plug into a power point and press
down the On/Off pedal (Fig. 3, A) to switch
the vacuum cleaner on.
To turn it off, press the pedal again.
Speed and suction power control
• Slide the speed control knob (Fig. 3, C)
up or down to adjust the suction power to
a level appropriate for the surface to be
vacuumed.
• To lower the suction power temporarily
during vacuuming, you can also push down
the suction control valve on the curved
handle (Fig. 4). Push it up again to cover the
opening for increased suction.
Instructions
A
C
F
G
D
E
B
Fig. 3
Fig. 4
