Stirling SVS4A-40CR Instruction Manual Download Page 5

When using electrical appliances, basic precautions should always be 
followed to reduce the risk of fire, electric shock and injury to persons, includ-
ing the following

IMPORTANT: 

Read these instructions fully before using the fan. Retain these 

instructions for future reference.

The packaging materials may contain plastics etc. which may be 
hazardous and should not be left within the reach of children. Remove all 
packaging materials and retain for future use. Ensure that no packaging 
residues remain on the appliance.
Use this fan only as described in this manual. Other use that is not recom-
mended may cause fire, electric shock or injury to persons. This will also 
void your warranty.
This appliance is intended for household use only and not for commercial, 
industrial or outdoor use. 
Dangerous high voltages are present inside the Motor Housing. To avoid 
electric shock, DO NOT disassemble the Motor Housing. Refer servicing 
to qualified personnel only.
Make sure the fan is not placed near drapes, curtains, or any objects that 
may be drawn into the fan.
To protect against fire, electrical shock and injury to persons, do not 
immerse plug, cord or unit in water or spray it with liquids.
The apparatus should not be exposed to dripping or splashing of water 
and no objects filled with liquids, such as vases should be placed near the 
product.
No naked flame sources, such as candles, should be placed near the 
product.

1. 

2. 

3. 

4. 

5. 

6. 

7. 

8. 

General Safety Instructions

5

MODEL: SVS4A-40CR   PRODUCT CODE: 51394  12/2015

AFTER SALES SUPPORT

1300 366 155

AUS

[email protected]

Do not operate the fan with a damaged cord or plug, after a 
malfunction or if it is dropped or damaged in any manner.
Do not operate the fan without the fan grilles properly in place.
Do not use or store the appliance where it may be exposed to water 
or any liquids. Do not use in or near a bathroom, near windows etc.
To prevent fire or shock hazard, DO NOT expose this appliance to 
rain or moisture.

Summary of Contents for SVS4A-40CR














Reviews: