Instructions
Place your fan on a level and dry surface.
Plug the fan into a suitable mains socket.
Use the Power Selector to select the desired speed setting:
0 (Off)
1 (Low)
2 (Medium)
3 (High)
The fan can be set to oscillate by pushing the Oscillation Knob downwards. To stop the
oscillating feature, pull up the Oscillation Knob.
To adjust the angle of the fan head, turn off the fan then push the top of the fan head until the
desired angle is reached.
CAUTION: The fan should always be switched off when making this adjustment.
To adjust the height of the fan head (103cm - 140cm height), turn off the fan then pull the inner
tube up to the desired height (by loosening the Height Adjustment Screw then re-tightening it to
secure it in place).
CAUTION:
WARNING: If any water enters the Motor Housing, it is important that it is allowed to dry
out thoroughly before plugging the unit back into the power supply. There is risk of
electric shock if there is any moisture in the motor when the unit is plugged in.
1.
2.
3.
4.
5.
6.
1.
2.
3.
Cleaning and maintenance
Keep the air vents at the rear of the main body free from dust or fluff; use a vacuum cleaner to
clean air vents when necessary. Do not insert fingers or any objects into any opening.
Fan component parts should be cleaned using mild soap and a damp cloth or sponge. Do not
allow any water or other liquid to enter the motor housing.
Thoroughly wipe off any soap film and make sure the unit is completely dry before plugging the
power plug back in to the power source.
11
MODEL: SVS4A-40CR PRODUCT CODE: 51394 12/2015
AFTER SALES SUPPORT
1300 366 155
AUS
Warning:
Make sure that the fan is fully assembled (and that the guards are in place and
locked) before switching on.
CAUTION: The fan should always be switched off when making this adjustment.
Power Selector Dial
Switch off and unplug from the power supply before assembling or disassembling
and cleaning.
Do not use harsh detergents, chemical cleaners or solvents; they may damage
the surface finish of fan components.
