background image

6

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-GH  PRODUCT CODE: 49187   05/2015

General Safety Instructions (Cont.)

General usage conditions and restrictions 

•  Domestic use only: 

This cooktop is designed for indoor domestic use 

only; commercial catering may invalidate the warranty. The cooktop can 
be built into a standard kitchen cabinet or housing unit. 

•  Intended purpose: 

Only use this cooktop for its intended purpose, in 

its intended environment and as described in this manual. Any other use 
may cause fire, electric shock or injury, and invalidate the warranty. 

•  No space heating: 

Do not use this cooktop for space heating purposes.

•  Ventilation: 

Heat, steam and moisture will be created during use of 

the cooktop. Take care to avoid injury and ensure that the kitchen is 
adequately ventilated. 

•  Follow instructions: 

Make sure to observe all rules and provisions in 

this instruction manual. Do not allow anybody who is not familiar with the 
contents of this manual to operate the cooktop. These instructions are 
not intended to cover every possible condition and situation. As with any 
electrical household appliance, use common sense and caution when 
installing, operating and maintaining the cooktop.

•  Power cord: 

Do not allow the power cord to come into contact with 

areas on the cooktop that get hot. Check the cord regularly for damage. 
Do not use the appliance if the cord, or any other part of the appliance, 
has been damaged. If the supply cord is damaged, it must be replaced 
by the manufacturer or its service agent or a similarly qualified person in 
order to avoid a hazard. 

•  Usage restriction: 

This appliance is not intended for use by persons 

(including children) with reduced physical, sensory or mental capabilities, 
or lack of experience and knowledge, unless they have been given 
supervision or instruction concerning use of the appliance by a person 
responsible for their safety.

•  Children and pets: 

Cooking appliances become very hot in use, 

therefore ensure children and pets are kept away. If it is necessary for 
younger family members to be in the kitchen, ensure that they are kept 
under close supervision at all times. Do not allow children to operate or 
play with any part of the appliance.

Summary of Contents for STR-GH





























Reviews: