17
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-GH PRODUCT CODE: 49187 05/2015
Gas connection
• Using the supplied gas regulator (Fig.9), remove
the dust seals on the inlet and outlet ports
and position the “OUT” port of the regulator
towards the gas inlet pipe of the cooktop as per
Fig 10.
• Using a suitable thread sealant, screw the
regulator on and ensure that it is orientated with
easy access to the test point (Fig 10).
• Connect the appropriate Natural Gas supply to
the “IN” port of the gas regulator.
Installation (Cont.)
Electrical connection
• Connection:
The appliance is equipped with an electrical cord and power
plug, which must be connected to the mains electricity supply in order
for the ignition to work. Insert the power plug firmly into an appropriate
electrical outlet and switch on power at the outlet.
• Wall socket:
The electric wall outlet must be properly earthed and
accessible. It must be suitable for the power drawn by the appliance.
The outlet voltage and circuit frequency must correspond to the voltage
stated on the appliance rating label.
• Power cord:
If the supply cord is damaged, it must be replaced by the
manufacturer or a similarly qualified person in order to avoid a hazard.
The power supply cord must not touch the hot parts of the cooktop.
• Electrical work:
Should any electrical work be required associated with
the electrical outlet that is to be used for the cooktop, all such work must
be carried out by an appropriately qualified, licensed electrician.
Gas
regulator
test point
Outlet port to
gas cooktop
Gas supply
inlet port
Fig. 11
Fig. 10
Fig. 9
