Stirling STR-23RSJAIF Instruction Manual Download Page 7 | Manualshive

Page: 7 / 28

Stirling STR-23RSJAIF Instruction Manual Download Page 7

7

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL:STR-23RSJAIF PRODUCT CODE:43512 10/2014

General Safety Instructions (Cont.)

• Smoke or burning smell:

If the appliance gives off smoke or there is a

burning smell, immediately disconnect the unit from the power supply and

contact the after sales support line.

Cleaning, servicing and repair
• Disconnect before cleaning:

Before carrying out any cleaning or

maintenance, make sure the unit is disconnected from the mains electricity

supply.

• Professional care:

Cleaning and maintenance must be carried out by

specialised technical personnel.

• Repair:

Only have the unit repaired by an authorised service centre.

Incorrect repair could expose you to the risk of electric shock, fire or

injury. Prolonged use of the unit in such conditions could cause fire or

electrocution.

Please refer to the Installation Manual for safety instructions specific to

the installation of the indoor and outdoor units.

«
...
5
6
7
8
9
...
»

Summary of Contents for STR-23RSJAIF





























Reviews:

No comments