18
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL:STR-23RSJAIF PRODUCT CODE:43512 10/2014
Instructions (Cont.)
Timer mode - Timer ON
Program the timer to switch the
unit on automatically (Fig. 16).
• To program the start time, make sure the
unit is switched off.
• Press the TIMER button on the remote
control to activate the timer, then use the
or buttons to set the desired temperature.
• Press the TIMER button again, then use the
or to set the time period after which
the unit will switch on. With every press of
the or buttons, the time will increase/
decrease by half an hour. Keep pressing
until the display shows the time that passes
between programming and the start time.
TIMER will be illuminated on the indoor unit
display (Fig. 17).
• To cancel the set function, press the TIMER
button again.
Indoor display
Timer mode - Timer OFF
Program the timer to switch the unit off automatically.
• To program the stop time, the unit should be switched on.
• Press the TIMER button on the remote control, then use the or buttons
to set the time period after which the unit will switch off. With every press of
the or buttons, the time will increase/decrease by half an hour.
• To cancel the set function, press the TIMER button again.
IMPORTANT!
• Before proceeding with the timed start, program the working mode (with
the MODE button) and the fan speed (with the FAN button). Then switch
the air conditioner off (with the ON/OFF button).
• In case of a power failure or other disconnections from the power supply,
you will have to reset your timer settings.
Fig. 17
Fig. 16