12
MODEL: SGC62 | PRODUCT CODE: 53593 | 06/2016
Installation Cont.
Affi xing the Hob
Once the sealing tape has been installed around the underside of the cooktop, carefully turn it back over and
gently lower it into the aperture hole that has been cut out. Push it down gently so that the cooktop is resting
fi rmly on the cabinet/benchtop surface.
• Secure the cooktop in position using the mounting clamps supplied.
• There are four mounting points (1,2,3,4) on the cooktop base to affi x the clamps (Fig. 6).
• Put the clamps in the location as indicated above in Fig 6 and using the screws provided, affi x the clamps
(Fig. 7, B) to the cooktop and tighten the screws (Fig. 7, C) securely shown in Fig. 7. This is very important.
The other side of the clamp must be located on
the underside of the bench top, as seen in Fig. 7.
Fig. 6
Fig. 7
1
2
4
3
