manualshive.com logo in svg

Stirling MDR70-VR031, Instruction Manual, Page: 24 / 28

Share
Download
Stirling MDR70-VR031 Instruction Manual Download Page 24

24

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: MDR70-VR031     PRODUCT CODE: 61494   06/2018

Other Useful Information (Cont.)

Storage

If you are not going to use the appliance for an extended period of time, unplug it and 
store it upright in the original packaging to protect it from dust. Store the unit in a dry 
place, out of children’s reach. 

Service, repair and spare parts

If the appliance is damaged, 

do not attempt to repair it yourself.

 Contact our after 

sales support centre to arrange for examination or repair of the product.
The following spare parts for the clothes dryer are available for purchase from our after 
sales support centre. To purchase a spare part, call the centre on 

1300 886 649 

or 

email us at 

[email protected] 

•  Accessory assembly
•  Adjustable foot assembly
•  Belt

 

•  Cabinet motherboard
•  Capacitor

 

•  Control panel and stickers
•  Door (hinge, pin)
•  Door (inner, outer, window)
•  Door switch support
•  Electric filter assembly
•  Front vent flange
•  Gasket
•  Heater
•  Impeller assembly
•  Internal wire assembly
•  Lint filter assembly
•  Motor (single phase, asynchronous)
•  Motor support
•  PCB
•  Power cord
•  Reset button
•  Sealing gasket
•  Temperature sensor
•  Thermostat

Summary of Contents for MDR70-VR031





























Reviews:

No comments