12
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: MDR70-VR031 PRODUCT CODE: 61494 06/2018
Installation (Cont.)
Step-by-step wall-mounting instructions
Step 1: Parts required
• Confirm that you have all the components from the wall-mounting kit (Fig. 2), plus
one extra printed control panel sticker (for use if wall-mounting upside down).
• Confirm that you have the following extra tools required:
– Drill (with a
∅
14mm drill bit)
– Phillips head screwdriver
– Another person to help you lift the dryer onto the wall.
Step 2: Preparation
• This dryer must only be installed on a solid wall.
• The distance in front of the wall must be more than 1.5m.
• If you intend to wall-mount the dryer upside down, take the additional printed
control panel (supplied) and affix it over the existing panel so that the printing is the
right way up when installed upside down.
2x Hanging brackets
2x Spacers 4x Expansion bolts 1x Positioning paper
Fig. 2
