14
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: MDR70-VR031 PRODUCT CODE: 61494 06/2018
Installation (Cont.)
Step 4: Bracket installation
• Attach the brackets to the wall using the four expansion bolts. The expansion bolts
consist of a bolt, an expansion tube, a nut and washers.
a. Insert a bolt and expansion tube into each of the four drilled holes and then
thread a nut onto the end of the bolts. To prevent the thread being damaged, do
not expose the end-thread of the bolt. Then hammer the four bolts into the holes
(Fig. 6).
Fig. 6
b. After you have hammered the bolts into the wall, remove the nut and washers.
Attach the hanging brackets to the bolts, then put the washers back on: first the
flat washer, then the spring washer, then the nut.
c. Tighten the brackets with a socket or a wrench (Fig. 7).
Fig. 7
