AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: JK-115C-W PRODUCT CODE: 10690 08/2019
13
Other Useful Information (Cont.)
Water filter
The scale particles that remain suspended in the water may give it a cloudy or
greasy appearance, depending on the hardness of the water. The filter fitted to
your kettle will prevent these parties passing into your drink. You must ensure
that the filter is kept clean and clear of deposits, otherwise the performance of
your kettle may be adversely affected, your drinks may contain scale particles,
and the water inside the kettle may look cloudy. You should clean the filter
whenever there are any noticeable deposits left on it, and especially if pouring is
affected in any way.
Cleaning the filter
Clean the anti-scale filter regularly to ensure an easy flow of water.
WARNING!
Before removing or refitting the filter, make sure the power base is unplugged
and the kettle is switched off, empty and completely cool.
• Remove the lid. The filter sits behind the
spout. Grip the filter and pull it away from
the spout.
• Under running water, rub the filter gently
with your fingers. Use a soft brush, if
necessary, but be careful not to use
anything that could tear or damage the
filter. Alternatively, wash the filter safely in
the cutlery rack/basket of your dishwasher.
• In hard water areas, descale the filter
regularly to avoid damaging the pouring
performance of your kettle. Soak the filter
in a descaling solution (see page 12), rub
off any residues gently with your fingers
and then rinse the filter thoroughly.
• To refit the filter before reuse, insert the three tabs at the filter's edge into the
small openings around the spout hole and press firmly until it clicks into place.
Storage
Before storing the appliance, make sure it is dry and unplugged. The power cord
may be wound around the cord storage underneath the power base. Store the
kettle in the original carton, which will protect it from dust, in a clean and dry
place, out of children's reach
.
