background image

07

AFTER SALES SUPPORT

    

   1300 777 137

   [email protected]

MODEL: IA4259    PRODUCT CODE:  707211    01/2022

General Information & Safety Instructions (cont.)

14.  Do not clean with metal scouring pads. Pieces of a metal scouring pads may break off and 

come in contact with the electrical parts creating a risk of electric shock.

15.  Do not immerse the Ice Cream Maker into water or any other liquid as this may cause an 

electrical shock.

Handling and Usage

1.  The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the Ice Cream 

Maker. This is a natural gas with a high level of environmental compatibility, which is very 

flammable. During transportation and installation of the appliance, ensure that none of the 

components of the refrigerant circuit become damaged. In the event of damage please contact 

our After Sales Support line on 1300 777 137.

2.  Before plugging in your new Ice Cream Maker, allow it to stand in an upright position with the 

lid removed for at least 2 hours before first use or if the Ice Cream Maker has been moved. 

This will allow the refrigerant gases to settle into the compressor and reduce the possibility of a 

malfunction in the cooling system from handling during transportation.

3.  When moving and transporting the Ice Cream Maker, make sure the Ice Cream Maker stays in 

an upright position. Do not tilt the unit more than 45˚ in any direction.

4.  Always operate the Ice Cream Maker on a clean, dry, level surface. Operating on carpet, sinks 

or uneven surfaces should be avoided.

5.  Always ensure that the Ice Cream Maker is clean before use. If the inner bowl is dirty, the ice 

cream may be contaminated and unfit for consumption.

6.  The inside of the Ice Cream Maker will be extremely cold and may cause cold burns. Do not 

touch the inside of the Ice Cream Maker or handle the inner bowl with your hands. Always use 

the oven mitts when removing the inner bowl.

7.  The ingredients will expand during the Ice Cream Making process. Do not overfill the Ice 

Cream Maker with more than the recommended amount (750mL) of ingredients.

8.  Arrange the cord away from high traffic areas where it will not become a trip hazard.
9.  Do not place the Ice Cream Maker on carpet, as it may create a blockage to the air ventilation 

and create risk of fire, spontaneous combustion, or injury to persons.

10.  Never clean this appliance with flammable cleaning agents. Do not store or use volatile, 

flammable or explosive propellants such as aerosol cans or liquids inside or near the Ice Cream 

Maker. The fumes can create a fire hazard or explosion.

11.  Never allow open flames or ignition sources to enter the Ice Cream Maker.
12.  Do not use solvent based or abrasive cleaning agents on the interior of the Ice Cream Maker as 

these may damage or discolour the surfaces of the appliance.

13.  Keep the Ice Cream Maker away from all substances that may cause ignition.

Summary of Contents for IA4259





























Reviews: