background image

06

AFTER SALES SUPPORT

    

   1300 777 137

   [email protected]

MODEL: IA4259    PRODUCT CODE:  707211    01/2022

General Information & Safety Instructions (cont.)

7.  Do not move or lift the Ice Cream Maker while the power cord is still connected to the power 

outlet or still on. Always ensure it is switched off and has cooled down before moving.

8.  Do not use the Ice Cream Maker if the plug, cord or the Ice Cream Maker itself is damaged. 

Please contact our After Sales Support line on 1300 777 137 for further advice.

9.  Unless your home is already fitted with a residual current device (safety switch), we 

recommend installing an RCD with a rated residual operating current not exceeding 30mA to 

provide additional safety protection when using electrical appliances. See your electrician for 

professional advice.

Usage Conditions and Restrictions

1.  The Ice Cream Maker is not to be used for commercial purposes and is intended for indoor 

household use only.

2.  Do not use the Ice Cream Maker outdoors.
3.  Do not use the Ice Cream Maker for reasons other than its intended purpose, and only use it as 

described in this manual. Do not attempt to alter or modify this appliance in any way.

4.  The Ice Cream Maker is not a toy. Supervise children to ensure they do not play with this product.
5.  The Ice Cream Maker is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities or lack of experience or knowledge unless they have 

been given supervision or instruction concerning use of the product by a person responsible 

for their safety.

6.  Do not position the Ice Cream Maker in a tight space. Ensure there is at least 15cm clearance 

on all sides of the Ice Cream Maker. Do not position near heat sources such as radiators, 

heaters, ovens, air ducts or direct sunlight.

7.  Make sure you position the Ice Cream Maker in a well ventilated area. To ensure sufficient 

ventilation, the rear, sides and top of the unit must be completely unobstructed. Keep any 

ventilation openings clear of obstructions. Choose a well ventilated area with temperatures 

below 30˚C.

8.  Do not cover the Ice Cream Maker whilst in use. Do not block any ventilation openings. Ensure 

that vents are not covered by newspapers, tablecloths, curtains, etc.

9.  Do not attempt to repair, disassemble or modify any part of the Ice Cream Maker. Refer all servicing 

to a qualified technician or contact the After Sales Support line on 1300 777 137 for advice.

10.  Improper installation may result in the risk of fire, electric shock or injury to person.
11.  The manufacturer is not responsible for any eventual damage caused by improper or faulty use.
12.  The use of attachments not sold or recommended by the manufacturer may cause fire, electric 

shock or injury.

13.  The Ice Cream Maker is not intended to be operated by means of an external timer or any type 

of separate remote control system.

Summary of Contents for IA4259





























Reviews: