Stinger GOLD STINGER X5, User Manual

Page: 14 / 37

Powering The Device On
Note 1:
To change the connected search coil, turn the device off and then
turn it on again, pressing G-Balance button and wait for the loading to com-
plete to show you the Ground Balance screen again.
Note 2:
If you want to search in the same place again, you do not need to
make a ground balance another time, because the device automatically
keeps the last ground balance in its memory.
Turn on the device with the button on the right side of the device main unit.
One of the search coils must be connected to the device correctly so that
the device can perform the ground balancing correctly.
After the start and welcome screen loading is complete, Ground Balance
screen will appear immediately.
You can also perform ground balancing by pressing the G-Balance button on
the control panel.
12
Powering Device On
Launch and start screen