English
Page | 18
S
TARTING
S
TIMULATION
Notes
:
▪
WAA automatically starts at lowest amplitude setting when turned on.
Steps:
1.
Place the WAA Antenna directly over top of the Stimulator-Receiver.
2.
Turn on the WAA by pressing the Power ON/OFF Key until the green
Power Indicator Light activates.
3.
Adjust the amplitude as directed by your clinician by using the
Increase or Decrease Amplitude Key.
S
ELECTING A
S
TIMULATION
P
ROGRAM
The WAA has three program options that may be set. The green indicator light
is used to identify which program is currently active on the device.
•
Program 1 = One Blink
•
Program 2 = Two Blinks
•
Program 3 = Three Blinks
Steps:
1.
After powered “On”, t
he WAA defaults to the last program used.
2.
Press “+” and “
-
” button
s at the same time to switch programs.
3.
The light pattern will blink to signify which program is active.
I
NCREASING OR
D
ECREASING
A
MPLITUDE
C
AUTION
:
Turn the power off or decrease the amplitude before changing the position of
the WAA Antenna to prevent possible uncomfortable stimulation.
Notes:
▪
WAA
must be turned on to increase or decrease the amplitude.
▪
WAA
does not need to be placed over the
Stimulator
to change
amplitude.
Steps:
1.
Press the “Up” arrow key to increase the amplitude.
2.
Press the “Down” arrow key to decrease the amplitude.
To receive the most effective therapy you will need to adjust your stimulation
throughout the day. Your clinician will provide guidelines about when you may
want to adjust your stimulation. The following table provides general guidelines
on how to adjust your stimulation.