3 |
P a g e
If no floor option was purchased, go to step 2.0 (Wall Assembly)
SKIP TO BACK FOR IMAGES TO HELP WITH FLOOR INSTALL
STEP 1.0
FLOOR KIT
1.0
–
FLOOR KIT (1 of 2 floor frames)
PART CODE QTY
DESCRIPTION
EP
2
End Plate 1242mm
SJ
3
Single Joist 1124mm
DJ
1
Double Joist 1124mm
100BS
18
100mm Batten Screw
1.0
–
FLOOR FRAME (1 of 2 floor frames)
Fasten floor frame together as indicated in diagram below, using lines and predrilled holes.
Screw through EP into DJ using 3x 100BS.
Screw through EP into SJ using 2 x 100BS per join.
Ensure frame is square by measuring from corner to corner diagonally, frame will be square
when both diagonal measurements equal the same.
REPEAT THIS PROCESS FOR FASTENING 1 MORE FLOOR FRAME.
ENSURE 42x35 side of the DJ sits at top.
Summary of Contents for S3110
