STILLA S3110, Assembly Instructions Manual

Page: 8 / 48

7 | P a g e
STEP 2.0
WALL ASSEMBLY
2.0 - ASSEMBLY PARTS – WALL ASSEMBLY
PART CODE QTY DESCRIPTION
FP 1 Front panel
12P 1 1200mm Wall panel
65HHS 3 65mm Hex head screw
If optional window was purchased, it can take the place of any 1200mm (12P) panel.
2.0 - ASSEMBLY – WALL ASSEMBLY
Screw through FP into 12P (top, centre & bottom) using 3 x 65HHS. (Holding studs flush on
the
outside )
Note: Ensure tongue on VJ cladding is facing upwards.
12P
Screw 3 x 65HHS (Top,
centre & bottom)
FP
Cedar Strip
When screwing the four corners together please make sure the studs are flush on the
outside (not the inside) as per image below.