4 |
P a g e
STEP 1.1
FLOOR FRAME INSTALLATION
The 6x4 floor frame comes in one part. Install floor frame in desired position at desired
height and fasten to logs once level and square.
1.1
–
FLOOR FRAME INSTALLATION
PART CODE QTY
DESCRIPTION
L
4
Logs 750x100x100mm
100BS
16
100mm batten screws
200PB
4
200mm M12 Post Bolt
W
8
M12 Washers
1.1
–
FLOOR FRAME INSTALLATION
1.
Lay out frame in desired position and mark holes to dig, as indicated on diagram
below (use shovel or marking paint).
2.
Dig and place logs in holes (using concrete if you wish).
3.
Fasten floor frame to logs at desired height, using 4x 100BS per log, ensuring frame is
level*.
* Fasten frame to logs when roughly level and then critique by hammering in or adding dirt
(or concrete) to corners until perfectly level at every post.
Once frame is installed, predrill holes (using a 13mm drill bit) and bolt each log to the floor
frame in spots indicated with 200PB, using washers on both sides.
Summary of Contents for S3005
