Still HPT-20, Original Instructions Manual

Page: 54 / 78

General maintenance information
Qualifications of personnel
Only qualified and authorised personnel are
allowed to perform maintenance work. The an-
nual testing must be carried out by a qualified
person. The examination and assessment by
the qualified person must not be affected by
operational and economic conditions and must
be conducted solely from a safety perspective.
The qualified person must have sufficient
knowledge and experience to be able to as-
sess the condition of an industrial truck and
the effectiveness of the protective equipment
according to technical conventions and the
principles for testing industrial trucks.
Maintenance work for which no special
qualifications are necessary
Simple maintenance work, such as checking
the hydraulic oil level, may be carried out by
untrained personnel. This does not require the
qualifications described above. Refer to these
operating instructions for further information.
Information regarding performing main-
tenance
This section contains all the information re-
quired to determine when your industrial truck
must be serviced. Be sure to perform mainte-
nance within the time limit according to the
maintenance overview; this is essential to ob-
tain the full operability, performance and serv-
ice life from the industrial truck, and is a pre-
condition for any warranty claims.
Maintenance
6
General maintenance information
46 50988046036 EN - 01/2021 - 01