Still EK-X, Original Instructions Manual

Page: 56 / 120

4
Operation
Daily commissioning
Daily commissioning
Checklist before starting work
WARNING
If, after having done the checks before starting
work any defects, regarding operating or traffic
safety are discovered, then steps have to be taken
immediately to properly and professionally repair
theses defects.
It is prohibited to continue using the truck until it is
repaired.
Before starting work, the driver is required to
check that the truck is in correct working order.
General checks:
• Clarify whether a driver’s permit is manda-
tory in the country of application.
• The truck may only be operated with closed
lids and flaps and with all covers in place.
Function check of the braking systems
• Check the function of th foot switch braking
function.
• Check the reversing brake. The braking and
subsequent acceleration must be smooth
and without jerking.
• Check the braking function after actuating
the emergency STOP switch and
• Check system function on End of aisle
braking*: Automatic braking with release,
creep speed switchover and complete stop.
Steering performance test
• The steering must be controllable without
jerking.
• Maximum steering angle right/left appr.
90°must be reached. .
Function check of the operating devices
• Check the function of handles, keys and
levers.
• The control lever and keys must return to
their neutral position automatically.
• All operating elements have to be checked
for proper function and condition.
50 5213 804 2501 EN - 01/2016