Still EK-X Original Instructions Manual Download Page 12

Page: 12 / 120

Foreword

Product support documentation

Product support documenta-

tion

This includes:
• Spare parts list
• Operating and maintenance manual
• VDMA (German Engineering Federation)

information booklet on proper usage

• Any additional documentation for the

driver’s seat

• Any additional documentation for an attach-

ment

• Any additional documentation for the

battery

• Any additional order-related documentation

Accessories accompanying

the product

Each truck is supplied with a box of acces-

sories upon delivery from the factory.
The contents differ depending on the truck

type and the order.
This includes, among other items, an adhesive

label that shows how to disable the magnetic

brake on the traction motor using mechanical

means. This adhesive label can be afﬁxed in

a suitable position in the control compartment

near the magnetic brake.
This box also contains the documentation

to accompany the product, and the screws

and wrench that are required to disable the

magnetic brake.
Depending on the type, additional lubricating

nipples may be included for maintenance.

5213 804 2501 EN - 01/2016

Summary of Contents for EK-X

























































































































Search results

Summary of Contents for EK-X

Reviews:

Brands by name

Popular brands

Still EK-X, Original Instructions Manual

Search results

Summary of Contents for EK-X

Reviews:

Brands by name

Popular brands