Still ECH 12C Original Instructions Manual Download Page 21

Page: 21 / 114

Environmental considerations

Packaging

During delivery of the truck, certain parts are

packaged to provide protection during trans-

port. This packaging must be removed com-

pletely prior to initial start-up.

ENVIRONMENT NOTE

The packaging material must be disposed of

properly after delivery of the truck.

Disposal of components and

batteries

The truck is composed of different materials. If

components or batteries need to be replaced

and disposed of, they must be:

●

disposed of,

●

treated or

●

recycled in accordance with regional and

national regulations.

NOTE

The documentation provided by the battery

manufacturer must be observed when dispos-

ing of batteries.

ENVIRONMENT NOTE

We recommend working with a waste man-

agement company for disposal purposes.

Foreword

Environmental considerations

5001 801 1532 EN - 10/2021 - 03

Summary of Contents for ECH 12C



















































































































Search results

Summary of Contents for ECH 12C

Reviews:

Related manuals for ECH 12C

Brands by name

Popular brands

Still ECH 12C, Original Instructions Manual

Search results

Summary of Contents for ECH 12C

Reviews:

Related manuals for ECH 12C

Brands by name

Popular brands